39
English
Press the programmed Text Message button and
proceed to Step 3.
OR
Press the programmed One Touch Access button to
send a predefined Quick Text message to a
predefined alias or ID and proceed to Step 6.
OR
Follow the procedure below.
1 c to access the menu.
2. ^ or v to Messages and press c to select.
3. ^ or v to Quick Text and press c to select.
4. ^ or v to the required Quick Text and press c to
select.
5. A blinking cursor appears.
Use the keypad to edit the message, if required.
Press < to move one space to the left.
Press > or the # key to move one space to the
right.
Press the *DEL key to delete any unwanted
characters.
6. Press c once message is composed.
7. ^ or v to the required alias or ID and press c to
select.
OR
^ or v to Manual Dial and press c to select.
Key in the subscriber alias or ID and press c.
OR
d to edit the message.
To Next Page
Loading...
