Advanced Features
English
29
NOTE: You can add, delete, or edit subscriber IDs for the
Digital Contacts list.
For the Analog Contacts list, you can only view the list
and initiate a Call Alert. Adding, deleting, and editing
capabilities can only be performed by your dealer.
Making a Group Call from Contacts
Procedure:
1 S to access the menu.
2 Por Q to Contacts and press N to select.The
entries are alphabetically sorted.
3 Por Q to the required group alias or ID.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5 Press the PTT button to make the call. The LED lights up
solid green. The display shows the group alias or ID, and
the Group Call icon.
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
7 Release the PTT button to listen. When any user in the
group responds, the LED blinks green. You see the Group
Call icon, the group ID, and that user’s ID on your display.
8 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
Making a Private Call from Contacts
Procedure:
1 S to access the menu.
2 Por Q to Contacts and press N to select.The
entries are alphabetically sorted.
3 Por Q to the required subscriber alias or ID.
OR
Por Q to Manual Dial and press N to select.
If there was previously dialed subscriber alias or ID, the
alias or ID appears along with a blinking cursor.
Use the keypad to edit the ID.
OR
Por Q to Manual Dial and press N to select.
Use the keypad to enter a new subscriber alias or ID.
NAG-LACR-EMEA.book Page 29 Monday, April 28, 2008 4:59 PM
To Next Page
Loading...
Need help?
General
