EasyManua.ls Logo

Motorola XPR 6300 User Manual

Motorola XPR 6300
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
XPR 6300/6350/6500/6550
Digital Portable Radio
Quick Reference Card
Product Safety and RF Exposure Compliance
ATTENTION!
This radio is restricted to occupational use only to satisfy
FCC RF energy exposure requirements. Before using this
product, read the RF energy awareness information and
operating instructions in the Product Safety and RF
Exposure booklet enclosed with your radio (Motorola
Publication part number 6881095C98) to ensure
compliance with RF energy exposure limits.
Write your radio’s programmed features on
the dotted lines.
Select a Zone Using the Menu
Select a Channel
Method 1: Using the Select Knob
After selecting the desired zone, turn the 16-
position Select Knob to the desired channel.
Method 2: Using the Menu
Send an Emergency Alarm
Send Silent Emergency Alarm
Answer a Phone Call
Send a Phone Call
Before using this product, read the operating instructions
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
!
Caution
16-Position
Select Knob
Display
Top Button
_ _ _ _ _ _ _
3-Position
Home button
Menu Button
Keypad
Top Side
Button
_ _ _ _ _ _ _
On/Off/
Volume Knob
Side Button 1
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
PTT Button
Speaker
1 Press U until
2 Press D, E, or F directly below ZONE.
3 Press U until the zone you desire is shown
OR
Use the keypad directly to dial the zone
number.
4 Press h to confirm, or press PTT to transmit.
1 Press U until
2 Press D, E, or F directly below CHAN.
3 Press U until channel you desire is shown
4 Press h to confirm, or press PTT to transmit.
1 Radio on and press Emergency button. You
see red LED; you hear short, medium-pitched
tone.
2 Display shows .
3 When acknowledgment is received, you hear
four tones;alarm ends;radio exits emergency.
ZONE
CHAN
EMERGENCY
1 Radio on and press Emergency button. You
see no LED; you hear no tone.
2 Press PTT.
3 Alarm continues until you exit by:
Press and hold Emergency button for one
second.
OR
•Press PTT again.
1 Phone-like ringing, LED flashes GREEN,
PHONE CALL and m are displayed.
2 Press Call Response button.
3 Press PTT button to talk; release to listen.
4 Press h to hang up.
1 Press U until
2 Press D, E, or F directly below PHON.
3 Press U or V to scroll to phone number.
4 Press PTT (or Quick Access button, if
programmed) to talk, release to listen.
PHON
Question and Answer IconNeed help?

Do you have a question about the Motorola XPR 6300 and is the answer not in the manual?

Motorola XPR 6300 Specifications

General IconGeneral
BrandMotorola
ModelXPR 6300
CategoryTwo-Way Radio
LanguageEnglish

Summary

Product Safety and RF Exposure Compliance

Radio Zone and Channel Management

Instructions for selecting radio zones and channels.

Emergency Alarm Procedures

Steps for sending silent and standard emergency alarms.

Phone Call Handling

Procedures for answering and sending phone calls.

Display Status Symbols

Status Symbol Groupings

Groups of symbols indicating call status, mode, signal strength, and battery.

Computer Software Copyrights

Disclaimer

Documentation Copyrights

General Radio Operation

Notations Used in This Manual

Explains the use of WARNINGS, CAUTIONS, and Notes in the manual.

Physical Features of the XPR 6300/6350/6500/6550 Radio

Key Controls and Indicators

Describes physical controls like buttons, knobs, keypad, and indicators like LED and display.

Connectors and Accessories

Identifies physical connectors and related items like antenna, universal connector.

Programmable Features

Feature List and Pages

Lists programmable features and the pages where they are described in detail.

Display

Backlight Functionality

Explains how to use the display backlight for better visibility.

Status Symbols

Related product manuals