Motorola xpr6550 User Manual

Advanced Features
English
52
OR
Procedure:
Using the menu.
1 S to access the menu.
2 Por Q to Contacts and press N to select. The
entries are alphabetically sorted.
3 Por Q to the required alias or ID and press N to
select.
OR
Por Q to Manual Dial and press N to select.
Key in the subscriber alias or ID and press N.
4 Por Q to Radio Disable and press N to select. The
LED blinks green.
5 The display shows Radio Disable: <Subscriber Alias
or ID> and the LED lights up solid green.
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.
Do not press R during the Radio Disable operation as you
will not get an acknowledgement message.
Radio Enable
Procedure:
Using the programmed Radio Enable button.
1 Press the programmed Radio Enable button.
2 Por Q to the required alias or ID and press N to
select.
3 The display shows Radio Enable: <Subscriber Alias
or ID> and the LED lights up solid green.
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display shows Radio
Enable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Enable Failed.
OR
Procedure:
Using the menu.
1 S to access the menu.
2 Por Q to Contacts and press N to select. The
entries are alphabetically sorted.

NAG-LACR-EMEA.book Page 52 Monday, April 28, 2008 4:59 PM

Motorola xpr6550 Specifications

General

Channels	128
Emergency Button	Yes
Bluetooth	No
Keypad	Yes
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz