English
Sending an Emergency Alarm
1 Press the programmed Emergency button.
2 The display shows Sending Alarm, which
alternates with your radio ID. The LED lights
up solid green and the Emergency icon
appears on the Home screen display.
3 When an Emergency Alarm acknowledgment
is received, the Emergency tone sounds and
the LED blinks green. The display shows
Emergency Alarm Successful.
OR
If your radio does not receive an Emergency
Alarm acknowledgement, and after all retries
have been exhausted, a tone sounds and the
display shows Emergency Alarm Failed.
4 Radio exits the Emergency Alarm mode and
returns to the Home screen.
If your radio is set to Silent, it will not display any
audio or visual indicators during Emergency
mode.
Privacy
Press the programmed Privacy button to toggle
privacy on or off.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Utilities. Press N to
select.
3 Por Q to Radio Settings. Press N to
select.
4 Por Q to Privacy. Press N to select.
5 The display shows Privacy and Turn On.
Press
N to enable privacy. The display
shows Privacy On.
OR
The display shows Privacy and Turn On.
Press
N to disable privacy. The display
shows Privacy Off.
NAG-LACR-EMEA.book Page 74 Monday, April 28, 2008 4:59 PM
To Next Page
Loading...
