Start
Put in the cards & power on
Your 4G nano SIM card is already installed in your phone. If
you need to replace the SIM card or insert an optional
microSD memory card, follow these instructions.
Caution: Make sure you use the correct size SIM card, don’t
cut the SIM card, and don’t use an adapter with your SIM
card.
1. Use the tool to pop out the 2. Put the nano SIM card and
SIM/memory card tray. optional microSD memory
card in the tray with the
gold contacts facing up.
Nano
SIM
3. Push the tray back into
your phone.
Use the TurboPower™ charger to charge up or top up your
phone fast. Your phone shows the charge level as it charges.
4 Start
To turn on your phone, press and hold the Power button until
the screen turns on.
Power
button
Warning: Please use only an approved charging accessory to
charge your phone. Improper handling of the charging port,
as well as the use of an incompatible charger, may cause
damage to your phone and void the warranty.
To Next Page
Loading...
Need help?
General
