Need help?Do you have a question about the motortronics CSD-402 and is the answer not in the manual?
General| Brand | motortronics |
|---|---|
| Model | CSD-402 |
| Category | DC Drives |
| Language | English |
Mandatory safety precautions regarding servicing equipment with voltage applied.
Specifies environmental conditions and minimum spacing for proper installation.
Lists key electrical and performance specifications for the CSD Series drives.
Provides recommended practices for connecting main power to the drive.
Essential safety warnings for wiring, including avoiding output terminals.
Instructions for making a positive ground connection for safety and operation.
Details the function of each terminal on the control terminal block (TM2).
Explains the function of each terminal on the TM1 power terminal block.
Details the physical layout and available connections of the TM2 terminal block.
Explains wiring for remote start/stop and direction using terminals 3 & 4.
Explains how jumpers JP1 and JP2 select the analog signal type.
Explains how to enter and change function parameters using the keypad.
Details core function parameters like Fn00-Fn12.
Essential checks for wiring, voltage, and connections before applying power.
Lists failures like CPU error and EEPROM error with their causes and actions.
Lists common faults like overcurrent and overvoltage with reset procedures.
Lists faults like motor overload (OL1, OL2) and overtorque (OL3).
General approach to diagnosing drive malfunctions using flowcharts.
Flowchart for diagnosing power section issues when the motor won't run.
Critical instructions for safely replacing fuses, especially the DC bus fuse.
To Next Page
