To Next PageTo Next Page
Need help?Do you have a question about the MOTU 8pre and is the answer not in the manual?
General| Mic Preamps | 8 |
|---|---|
| Bit Depth | 24-bit |
| Connectivity | FireWire |
| Digital I/O | ADAT |
| Computer Connection | FireWire |
| Analog Outputs | 8 x TRS |
| Digital Inputs | 1 x ADAT Optical |
| Digital Outputs | 1 x ADAT Optical |
| Phantom Power | Yes (+48V) |
| Software | CueMix FX |
| Analog Inputs | 8 x XLR/TRS combo (Mic/Line/Instrument) |
Comprehensive list of essential safety and operating instructions for the device.
Description of all front panel knobs, buttons, and LEDs for input and volume control.
Identification and description of all rear panel audio and interface ports.
Setting up sample rate, clock source, and default audio I/O for the 8pre.
General introduction to the 8pre's capabilities and main features.
Step-by-step instructions for connecting the 8pre to a computer via FireWire.
Steps for installing the 8pre drivers and software on Mac OS X.
Methods for opening and navigating the MOTU Audio Setup application.
Setting the desired sample rate for recording and playback to match connected devices.
Explanation of Internal, ADAT optical, and SMPTE clock source settings.
Explanation of the VOLUME knob's functions for adjustments.
Initial system setup for using the 8pre with Digital Performer.
Adjusting sample rate, clock source, and other settings in MOTU Audio Setup.
Initial system setup for using the 8pre with AudioDesk.
Adjusting sample rate, clock source, and other settings in MOTU Audio Setup.
Procedure for installing the necessary audio and MIDI drivers for Mac OS X.
Understanding the causes and effects of audio delay during live input monitoring.
How to configure buffer size to minimize monitoring delay.
Using CueMix DSP for zero-latency monitoring without CPU strain.
How buffer size affects delay and computer performance.
Balancing buffer size for latency reduction against CPU load.
Advantages of using CueMix DSP for latency-free monitoring.
Methods for controlling CueMix DSP via its console or host software.
Introduction to CueMix Console for managing 8pre's mixing features.
Benefits of using CueMix Console for latency-free monitoring.
Introduction to the 8pre's SMPTE time code capabilities.
Overview of required hardware and software for SMPTE synchronization.
Steps to slave DP or AudioDesk to the 8pre's SMPTE time code.
Troubleshooting sample-accurate sync, Cubase visibility, and software authentication.
Troubleshooting monitoring problems and latency reduction.
Ways to contact MOTU technical support via phone, fax, or email.
