Need help?Do you have a question about the MOTU UltraLite-mk3 Hybrid and is the answer not in the manual?
General| A/D Resolution | 24-bit |
|---|---|
| Computer Connectivity | USB 2.0, FireWire |
| Phantom Power | Yes |
| Mic Preamps | 2 |
| Form Factor | Desktop |
| Audio Interface Type | Hybrid |
| Analog Inputs | 2 x XLR/TRS Combo, 6 x TRS |
| Analog Outputs | 8 |
| MIDI I/O | 1 x MIDI In, 1 x MIDI Out |
| Headphone Outputs | 1 x 1/4" |
| Bus Powered | Yes |
| Inputs | 8 analog, 1 ADAT, 1 S/PDIF |
| Outputs | 8 analog, 1 ADAT, 1 S/PDIF, 1 headphone |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| Number of Channels | 10-in/14-out |
| Audio Inputs | 2 x XLR/TRS combo jacks, 6 x 1/4" TRS line inputs, S/PDIF digital I/O |
| Dimensions | 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm) |
Specifies the minimum hardware and software requirements for using the UltraLite-mk3 on Mac.
Outlines crucial precautions to prevent damage during installation.
Explains how to connect the UltraLite-mk3 to a computer via FireWire or USB.
Details how to connect microphones, instruments, and line-level audio devices.
Describes the methods for powering the UltraLite-mk3, including bus power and DC adapter.
Details how buffer size affects latency and computer performance.
Guides on synchronizing audio software with SMPTE time code using the UltraLite-mk3.
To Next Page
