Need help?Do you have a question about the MOTU USB-MIDI and is the answer not in the manual?
General| Brand | MOTU |
|---|---|
| Model | USB-MIDI |
| Category | Recording Equipment |
| Language | English |
Steps to connect the MOTU USB MIDI interface to a computer via USB.
Guide on how to connect MIDI devices to the MOTU interface.
Details on establishing SMPTE time code synchronization.
Step-by-step guide to install the MOTU USB MIDI driver and console software.
How to utilize the interface's MIDI ports with sequencing software.
Connecting a sequencer to synchronize with SMPTE time code.
Using a sequencer for MIDI Machine Control (MMC) transport.
Instructions for sending time code to other studio devices.
How to select presets directly from the Express XT front panel.
How to select presets directly from the micro express front panel.
Overview of the Micro Express Console's control center functions.
Steps to launch and open the Micro Express Console application.
Overview of the MIDI Express XT Console's control functions.
Steps to launch and open the MIDI Express XT Console application.
Explains how the MIDI Express XT processes MIDI data internally.
Steps to change and save user-defined setups.
Configuration for pedal inputs, including click-to-MIDI.
How to convert audio clicks into MIDI messages.
How to access SMPTE synchronization settings via software.
Procedure for achieving SMPTE lock with the interface.
How the interface handles time code dropouts using freewheeling.
Creating new time code to maintain synchronization during tape copying.
Displays real-time SMPTE information from the interface.
Explains how the MIDI Timepiece AV processes MIDI data internally.
The central window for configuring MIDI data routing.
Function for filtering unwanted MIDI data passing through ports.
Allows remapping MIDI channels for input/output ports.
Configuration window for synchronization features.
Window for accessing advanced MIDI control settings.
Explains how to configure and save device setups (presets).
Configuration of pedal inputs, including type, polarity, and range.
Routing MIDI data between ports using the front panel controls.
Managing and configuring the interface's base setups.
Front panel controls for SMPTE format, destination, and offset.
Configuring pedal inputs for MIDI messages or audio click conversion.
How to reset the device to its original factory settings.
The AV's role as a central synchronization hub for the studio.
Selecting the primary sync source (master) for the studio.
Detailed steps and considerations for synchronizing with video.
Process of generating and recording SMPTE time code.
Connecting a sequencer to synchronize with the AV.
Explanation of how MMC operates and its components.
Best practices for configuring MMC in a studio setup.
How to configure unique MMC device identifiers for the AV.
Connecting Digidesign hardware to the AV for synchronization.
Explains SMPTE synchronization, its workings, and AV interface usage.
Steps required to successfully lock a MOTU interface to SMPTE.
Common issues encountered with MOTU USB interfaces and their solutions.
Troubleshooting steps for interface SMPTE synchronization failures.
Contact information and recommended details for technical support.
To Next Page
