22
EN
• Fitting the lid assembly
The appliance's lid is made up of three parts: the motor-unit lid (D1), the seal-mounting cup
(D2) and the sealing ring (D3).
These 3 items come assembled.
For your future uses, there are two ways to assemble the lid:
Steps Scenario 1 Scenario 2
1
Place the jug (F) on the base of the appliance (A), holding the handle (F1) (Fig. 2).
2
Place the sealing ring (D3) on the seal-mounting cup (D2) (Fig. 19).
To Next Page
Loading...
