Multi-Shot - (default 1-Shot) -When the Game Spy Camera is configured for
STILL in the Capture Mode screen, the camera can take 1, 2, or 3 pictures each
time an animal is detected. There is an approximate 5 second delay between
pictures based on battery strength. To change the number of pictures taken, press
the UP/DOWN buttons to highlight the desired setting. Press the ENTER button
to save the setting and return to the Camera Setup Menu.
Video Resolution - (default High) -Video resolution can be set to LOW or HIGH.
The higher the quality of the video, the more memory it consumes. However,
higher quality videos have higher resolution.
Low: 352 x 192 @ 24fps High: 720 x 400 @ 24fps
Press the UP/DOWN buttons to highlight the desired setting. Press the ENTER
button to save the setting and return to the Camera Setup Menu.
Video Length- (default 5 seconds) -When the Game Spy Camera is configured
for VIDEO in the Capture Mode screen, the camera will record video for a
designated amount of time each time an animal is detected. To change the amount
of time recorded, press the UP/DOWN buttons to highlight the desired setting.
Press the ENTER button to save the setting and return to the Camera Setup Menu.
The maximum video length for a nighttime IR video is 10 seconds.
Photo Delay - (default 1 minute) -The photo delay determines the number of
minutes between pictures when an animal is detected and remains in range.
To change the delay time, press the UP/DOWN buttons to highlight the desired
setting. Press the ENTER button to save the setting and return to the Camera Setup
Menu. Additional menu choices are available by hitting the UP/DOWN button
when the first/last option is highlighted. Photo Delays can be set to 15 and 30
seconds, 1, 5, 10, 30 and 60 minutes.
PHOTO DELAY
1 MIN
MULTI SHOT
1-SHOT
VIDEO RESOLUTION
LOW
VIDEO LENGTH
5 SEC
To Next Page
Loading...
Need help?
General
