Need help?Do you have a question about the Moultrie LX-50IR and is the answer not in the manual?
General| Storage | SD Card (up to 32GB) |
|---|---|
| IR Flash Range | 50 ft |
| Detection Range | 50 ft |
| Flash Type | Infrared |
| Megapixels | 20 MP |
| Image Sensor | CMOS |
| Battery Type | AA |
| Image Resolution | 20MP |
Compliance with FCC rules for radio frequency energy and Class B digital device limits.
Product may not comply with California Proposition 65 standards for birth defects or reproductive harm.
Advice on camera handling, memory card safety, lens cleaning, and avoiding unauthorized service.
Guidelines for using Alkaline batteries, replacement, and storage recommendations.
Details the product's one-year warranty against defects in material and workmanship.
Provides contact details for customer support and online registration.
How to navigate and view time lapse image sequences using the software's controls.
Adjusting sensitivity for detecting pixel changes in time lapse viewing.
Instructions for downloading and installing the time lapse imaging software.
Steps to open and load time lapse image files into the software for viewing.
Lists the pre-configured factory settings for the camera's operation.
Technical details and operational parameters of the camera, including resolutions and ranges.
Steps to connect the camera to a TV for displaying photos and videos.
How to navigate and play videos when connected to a TV using the camera controls.
Instructions for deleting media files while in TV playback mode.
Methods for downloading images in the field using external devices or card readers.
Procedures for safely removing the SD card from the camera before accessing data.
Steps to connect the camera to a PC for image transfer via USB cable.
Explains various buttons, indicators, and components of the camera for user reference.
Instructions for inserting C-Cell batteries into the camera, ensuring correct polarity.
Guide for inserting the SD memory card into the camera for data storage.
How to turn on the camera and navigate the initial setup menus.
Options for selecting image resolution: High, Medium, or Low.
Explains operating modes: Auto Photo, Auto Video, and Time Lapse.
Information on SD card compatibility, capacity, and important notes for usage.
Adjusting the infrared flash mode: Auto, Off, or Flash.
Using IR Aim mode to guide camera positioning for target areas based on motion detection.
How to assign a custom name or identity to the camera for identification.
Procedure for updating the camera's firmware using an SD card.
Configuring interval time, multi-program, wake up, and sleep times for time lapse.
Information on using tripods, tree mounts, and external power panels.
Navigating the main setup menu to access various camera settings.
Configuring event delay, photo/video capture, and PIR sensitivity for motion detection.
Adjusting date/time, erasing images, capture modes, and reset options.
How to set the current date and time on the camera for accurate logging.
Option to delete all stored photos and videos from the camera's memory.
Choosing between Game Detect, Time Lapse, and Hybrid capture modes.
Restoring the camera to its original factory default settings.
To Next Page
