8
A3
A1
A2
A2
A1
A3
Lay the Desktop (#A) pieces out upside-down in the configuration shown below. Reference the stickers
on the underside to identify the proper pieces so that they connect in order left to right A1, A2, A3.
Use the Tabletop Connectors (#i) in the locations shown and secure in place using Screws (#d).
Tighten until secure.
Assemble the Desktop
Step 2
Option A: Long side of
desk on the right hand side
Option B: Long side of
desk on the left hand side
i
d
i
d
To Next Page
Loading...