Mountain Models SwitchBack Senior - Parts List

4
Parts List:
• This Manual … If you do not have the manual you are holding, please call us. ☺
• Laser Cut Wood
o 7 ea. 1/16” x 4” x 24” Balsa
o 4 ea. 1/16” x 3” x 24” Balsa
o 4 ea. 3/32” x 4” x 24” Balsa
o 4 ea. 1/8” x 4” x 24” Balsa
o 2 ea. 1/8” x 3” x 24” Balsa
o 2 ea. 3/16” x 4” x 24” Balsa
o 1 ea. 1/8” Plywood Sheet
o 2 ea. 1/8” Lt Plywood Sheet
o 1 ea. 1/16” Plywood Sheet
o 1 ea. 1/8” Plywood “loose” part
• 2 ea. Red Pushrod Housings
• 2 ea. 1/16” x 24” Wire
• 2 ea. 1/16” x 12” Wire
• 1 ea. 0.047” x 9” Wire
• 2 ea. 0.060” x 24” Carbon Fiber Rod
• 2 ea. 1/8” Pre-Bent Landing Gear Wire
• Plastic Vac-Formed Canopy and Cowling
• Parts Bag
o 8 ea. EZ Hinges
o 4 ea. EZ Servo Connectors
o 8 ea. 4-40 T-Nuts
o 8 ea. 4-40 x 3/8” Machine Screws
o 2 ea. 10-32 T-Nuts
o 2 ea. 10-32 Nylon Bolts
o 2 ea. 2” DuBro Wheels
o 1 ea. 1” DuBro Tail Wheel
o 2 ea. 1/8” Wheel Collars
o 4 ea. Magnetic Washers
o 4 ea. Non-Magnetic Washers
o 4 ea. #2 Cowling Mounting Screws
o 3/16” x 5” Dowel
o Double Sided Velcro “Battery Seatbelt”
o 6” Sticky Backed Velcro
o 4 ea. Wire Ties