EN
10. MAINTENANCE TABLE
Intervention Frequency Notes
MACHINE
Check all fasteners
blade.
Before use
General cleaning and inspection
After each use
-
ENGINE
Before use
* *
11. PROBLEM IDENTIFICATION
PROBLEM PROBABLE CAUSE SOLUTION
1. The engine
does not
operates
irregularly or
stops during
operation
Incorrect starting procedure
No oil or fuel in the engine.
gap.
Check the spark plug (refer to the engine manual).
Carburation fault.
2. Engine
The manual start handgrip has been
operated repeatedly with the starter
engaged.
The manual start handgrip has been
operated repeatedly with the spark plug
cap removed.
Insert the spark plug cap and try to start the engine.
3. The cut grass
is no longer
collected in
the grass
catcher.
The cutting blade has hit a foreign
Stop the engine and remove the spark plug cap. Check for any
The inner part of the chassis is clogged.
4. Mowing is
The cutting blade is not in good
condition
sharpening or replacement of the cutting blade.
5. Excessive
or vibration is
experienced
whilst
working.
The pin on the cutting blade is out of
its seat.
Check for any damaged or loose parts.
cutting blade is damaged.
To Next Page
Loading...
