To Next PageTo Next Page
Need help?Do you have a question about the Mountfield 1538M SD and is the answer not in the manual?
General| Power Source | Petrol |
|---|---|
| Engine Brand | Stiga |
| Engine Type | ST 350 |
| Engine Capacity | 352 cc |
| Cutting Width | 98 cm |
| Cutting Height | 25-80 mm |
| Drive | Rear-wheel drive |
| Weight | 160 kg |
| Fuel Tank Capacity | 6 Litres |
| Wheels | Front 15", Rear 18" |
| Starter Type | Recoil |
Explains emphasis methods for safety and operation information within the manual.
Provides essential general safety regulations for safe operation of the machine.
Covers pre-operation checks, personal safety, and machine inspection before use.
Details safe operating procedures, including starting, mowing on slopes, and using equipment.
Outlines procedures for machine maintenance, cleaning, and proper storage for longevity.
Explains the meaning and importance of various safety labels affixed to the machine.
Provides guidelines and regulations for safely towing a trailer with the machine.
Details the identification label and the essential data found on the machine.
Illustrates and describes the main components of the machine and their respective functions.
Instructions for safely unpacking the machine and its components after delivery.
Step-by-step guide on how to correctly mount and secure the steering wheel assembly.
Procedure for mounting the seat onto the machine's plate using provided screws.
Guide on installing the battery, connecting terminals, and ensuring safety devices are active.
Detailed instructions for correctly fitting the stone-guard, including spring and pin placement.
Guidance on repositioning anti-chipping wheels for optimal performance based on ground type.
Describes the function of the steering wheel in turning the machine's front wheels.
Explains the throttle control for regulating engine RPM and speed settings.
Details the four positions of the key ignition switch for starting and operating the machine.
Explains the function of the parking brake to secure the machine when parked.
Describes the mushroom switch for engaging blades and the associated brake system.
Details the lever used to adjust the cutting deck height across seven different positions.
Explains the brake pedal's operation for the rear wheels in hydrostatic transmission systems.
Describes the drive pedal for engaging wheels and controlling forward/reverse speeds in hydrostatic transmission.
Details the lever for disengaging the transmission for easier manual movement of the machine.
Provides critical safety advice for using the machine, emphasizing user responsibility and hazard awareness.
Explains how the machine's safety devices function to prevent starting or stop the engine.
Covers essential checks and operations before mowing, including seat adjustment, tyre pressure, fluid levels, and safety device verification.
Details on starting, moving, braking, reverse operation, grass cutting techniques, and ending mowing tasks.
Provides specific instructions and warnings for safely operating the machine on inclined surfaces.
Guidelines for safely transporting the machine on trucks or trailers, including securing methods.
Offers advice on achieving a healthy lawn through proper mowing techniques and frequency.
Highlights safety precautions to be taken before performing any cleaning or maintenance operations.
Details routine maintenance tasks for the engine, rear axle, and battery to ensure safety and performance.
Covers essential interventions like cutting deck alignment, wheel replacement, tyre repair, bulb replacement, and fuse replacement.
Provides specifications for machine adjustments and instructions for dismantling, replacing, and remounting blades.
Addresses issues where the starter motor fails to operate when the ignition key is turned to START.
Troubleshoots problems where the starter motor engages but the engine fails to ignite.
Diagnoses causes and solutions for difficult engine starting or inconsistent running performance.
Identifies reasons for reduced engine power or efficiency while the machine is actively cutting grass.
Investigates why the engine might stop unexpectedly during operation.
Addresses issues where the cutting blades fail to engage or activate properly.
Helps diagnose and correct problems resulting in an uneven or inconsistent grass cut.
Identifies potential causes for excessive or unusual vibrations experienced during machine operation.
Troubleshoots scenarios where the machine fails to move despite the engine running and drive pedal engagement.
An accessory for finely chopping grass cuttings, leaving them on the lawn as an alternative to ejection.
Device to keep the battery in good working order during storage, ensuring optimal charge and longevity.
An optional accessory designed for safely towing a small trailer with the machine.
An accessory designed to protect the front section of the machine from potential impacts.
A protective cover designed to shield the machine from dust when it is not in use.
