Mountfield 1228M H - User Manual

Realizzazione: EDIPROM / bergamo
GGP ITALY SPA
Via del Lavoro, 6
I-31033 Castelfranco Veneto (TV) ITALY
L
WA
Year . . . . . . . S/N° . . . . . . . . . . . . . . . .
dB
Model: . . . . . . . . . . . . . . . .
FR
TONDEUSE AUTOPORTÉE “RIDER”
MANUEL D’UTILISATION
ATTENTION! - Avant d’utiliser la machine, lire attentivement le
présent manuel.
RIDING MOWER
OWNER’S MANUAL
WARNING!
Read this manual carefully before using the machine.
AUFSITZMÄHER “RIDER”
GEBRAUCHSANWEISUNG
ACHTUNG! - Bevor man die Maschine verwendet lese man das
vorliegende Handbuch sorgfältig durch.
RASAERBA “RIDER”
MANUALE DI ISTRUZIONI
ATTENZIONE: prima di utilizzare la macchina, leggere attentamente
il presente manuale.
ZITMAAIER “RIDER”
GEBRUIKERSHANDLEIDING
LET OP! – Vooraleer de machine te gebruiken, lees aandachtig deze
handleiding.
71503491/8
72
• Tout de suite après l’achat, transcrire dans les espaces prévus les
données d’identification (3 – 5 – 6) qui sont indiquées sur l’étiquette
d’identification de la machine (☛ 2 - IDENTIFICATION DE LA MACHINE).
• As soon as you have purchased the machine, write the machine
identification data (3 - 5 - 6) found on the identification label in the spaces
provided (☛ 2 - IDENTIFICATION OF THE MACHINE).
• Tragen Sie sofort nach dem Kauf die Kennnummern (3 - 5 - 6) in die
entsprechenden Felder auf dem Kennungsschild der Maschine ein (☛ 2 -
KENNZEICHNUNG DER MASCHINE).
• Immediatamente dopo l’acquisto, trascrivere negli appositi spazi i dati di
identificazione (3 - 5 - 6) riportati sull’etichetta di identificazione della
macchina (☛ 2 - IDENTIFICAZIONE DELLA MACCHINA).
• Onmiddellijk na aankoop worden de identificatiegegevens (3 - 5 - 6)
genoteerd in de ruimten op het identificatielabel van de machine (☛ 2 -
IDENTIFICATIE VAN DE MACHINE).
EN
DE
IT
NL

Summary

Safety Information

Safety Regulations

Essential rules and precautions for safe operation of the machine.

Unpacking and Assembly Procedures

Assembly and Battery Connection

Instructions for assembling key parts and connecting the battery.

Commands and Control Instruments

Safety and Operation Controls

Key controls for safety, parking brake, ignition, and blade engagement.

Cutting and Drive Controls

How to Use the Machine

Seat Adjustment and Refuelling

Starting the Engine

Step-by-step guide for safely starting the machine's engine.

Moving Without Mowing

Instructions for operating the machine without engaging the cutting blade.

Grass Cutting Operation

Engaging the blade and operating the machine for cutting grass.

Cutting Height Adjustment

Slope Operation Guidelines

Safe operation guidelines for mowing on slopes.

Emptying Grass-Catcher and Channel

Safety Device Operation Summary

Safety Device Conditions Overview

Overview of conditions that allow or stop machine operation via safety devices.

Cleaning and Storage

Routine Cleaning Procedures

Storage for Long Periods

Maintenance Procedures

Accessing Mechanical Parts

Engine Maintenance

Instructions for engine oil draining and maintenance.

Battery Maintenance

Cutting Deck Adjustment

How to adjust the cutting deck for optimal grass cutting performance.

Brake and Drive Adjustments

Blade and Speed Lever Adjustments

Blade Sharpening and Balancing

Instructions for sharpening and balancing the cutting blade.

Scheduled Maintenance Guide

Machine Maintenance Schedule

Engine Maintenance Schedule

Troubleshooting Guide

Pilot Lamp and Starter Issues

Engine Starting Problems

Troubleshooting steps when the engine fails to start or runs erratically.

Engine Performance and Stopping Issues

Resolving engine performance issues, stopping, and indicator light problems.

Cutting and Vibration Problems

Fixing uneven cuts, poor collection, and unusual vibrations.

Technical Specifications

Mountfield 1228M H Specifications

Mechanical Drive Model

Speed

forward speed in 1st gear	1.5 km/h
forward speed in 2nd gear	2.7 km/h
forward speed in 3rd gear	4.0 km/h
forward speed in 4th gear	4.5 km/h
forward speed in 5th gear	6.8 km/h
reverse speed	2.0 km/h

Weight and Dimensions

weight	159 ÷ 168 kg
inside turning circle	1.4 m

Hydrostatic Drive Model

Cutting Specifications

cutting height	3 ÷ 8 cm
cutting width	71 cm
grass-catcher capacity	170 liters

Speed

forward speed	0 ÷ 8.6 km/h
reverse speed	0 ÷ 3.2 km/h

1228M H

Power and Electrical

electrical system voltage	12 V
battery capacity	18 Ah

Tyres

front tyre size	11 x 4-4
rear tyre size	15 x 6-6
front tyre pressure	1.5 bar
rear tyre pressure	1.0 bar