occurs with injuries or third
parties are injured, carry out
the rst aid measures most
suitable for the situation
immediately and contact
the medical authorities
for any necessary health
care. Carefully remove any
debris which could cause
damage or injury to persons
or animals if ignored.
Prolonged exposure to
vibrations can cause
injuries and neurovascular
disorders (also called
"Raynaud’s syndrome" or
"white hand"), especially
to people suering from
circulation disorders. The
symptoms can regard the
hands, wrists and ngers
and are shown through
loss of sensitivity, torpor,
itching, pain and discolouring
of or structural changes
to the skin. These eects
can be worsened by low
ambient temperatures and/
or by gripping the hand
grips excessively tightly. If
the symptoms occur, the
length of time the machine
is used must be reduced
and a doctor consulted.
• Do not use the machine if
• Never assemble metal cutting
means. The use of metal or
rigid blades of any type with
this machine is prohibited.
• Never use the machine
.
• Don’t use the machine if
the attachments/tools are
not installed in their seats.
• Never disengage, deactivate,
•
that cannot be controlled
and must be repaired.
• Do not strain the machine
too much and do not use a
risk of hazards and improve
2.4
STORAGE
Ensure regular maintenance
and correct storage to
high performance levels.
•
never repaired. Use original
• Be careful during adjustment
of the machine to prevent
parts of the machine.
The noise and vibration
levels shown in these
instructions are the maximum
levels for use of the machine.
The use of an unbalanced
cutting element, the excessive
To Next Page
Loading...
