3. GRASS CUTTING
3.1 Lift the stone-guard and attach the grass-catcher (1) correctly as
shown in the drawing.
3.2 To start the engine, follow the instructions in the engine booklet
and then pull the blade brake lever (1) towards the handle and give
a sharp pull on the starter cable knob (2).
For models with an electric starter, turn the starter key (3).
3.3 The lawn will look better if it is always cut to the same height and
in alternate directions.
3.4 When you have finishing mowing, release the brake lever (1) and
disconnect the spark plug cap (2). Remove the starter key (3)
(where fitted).
WAIT FOR THE BLADE TO STOP before carrying out any type of
work on the machine.
1
2
3.3
1
3.1
1
3.4
32
2
3.2
3
1
To Next Page
Loading...
