1. Warning: Read the instructions manual before using the machine
2. Beware of thrown objects: Keep other people at a safe distance
whilst working.
3. Beware of cutting:
Moving blades. Do not put hands or feet near
the blades. Disconnect the spark
4.
5.
12
8 9 10
plug before carrying out any repairs
Thank you for purchasing a Mountfield lawnmower. This machine will give you many years of safe and
reliable service if operated in accordance with these instructions. Please read and understand these
Operating Instructions before using your mower. Failure to do so could result in personal inju-
ry or damage to the equipment.
NEVER TIP THE MOWER ON ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
SAFETY PRECAUTIONS
Your lawnmower should be used with due care and attention. Symbols have therefore been place on various parts of
the machine to remind you of the main precautions to be taken. Their meaning is explained below. You are also
asked to carefully read the safety regulations in the applicable chapter of this handbook.
To access the underside, lift the front wheels by lowering the handle until it rests on the ground.
Only for electric lawnmowers
Only for electric lawnmowers
or maintenance.
DESCRIPTION OF SYMBOLS ON CONTROLS (where foreseen)
8. Slow -
9. Fast
10. Choke
11. Engine stop
12. Drive on
Maximum noise and vibration levels
Operator’s ear noise pressure level
(according to regulation 81/1051/EEC)........................................ db(A) 83,1
- Measurement uncertainty (2006/42/EC / EN 27574).................. db(A) 0,4
______________________________________________________________
Measured acoustic output level
(according to directive 2000/14/EC, 2005/88/EC)......................... db(A) 96,5
- Measurement uncertainty (2006/42/EC / EN 27574)................... db(A) 0,4
______________________________________________________________
Guaranteed acoustic output level
(according to directive 2000/14/EC, 2005/88/EC)........................ db(A) 98
______________________________________________________________
Vibration level (iaccording to the standard EN 1033).................... m/s 6,76
- Measurement uncertainty (2006/42/EC / EN 12096)................... m/s 0,8
2
2
1
2
3
4
5
11 12
13 14
13. Idle
14. Engine ignition
To Next Page
Loading...
