4 55
1 System arming
The alarm unit can be armed by pressing the arm - button
1. Two high-pitched beeps will conrm the operation and
the dome light will turn ON for approx. 30 sec. The system
has a 30 sec. arming delay which allows you to exit the
caravan without triggering an alarm. After this delay, the
system is fully armed.
If the PIR sensor battery level is becoming exhausted, a
‘Bop’ will sound after the arming acoustic signals (replace
PIR internal batteries. Use only 2 CR2032 batteries).
2 System disarming
To disarm the system, press disarm - button 2 on the
remote control. Three high-pitched beeps will conrm
disarming and the dome light will turn ON for approx.
30 sec.
3 System arming without
Internal sensors*
The system can be armed without enabling the wireless
PIR sensor(s). To do so,press button 3 on either remote
control to arm the system. One high-pitched beep will
conrm the system is armed with the sensors excluded.
5
To Next Page
Loading...
