6 7
6
6
4 Tilt sensor exclusion*
Arm the alarm as usual by pressing button 1. After the
usual two beeps wait 4 seconds and press button 3. Tilt
sensor exclusion is conrmed by one beep.
DISARM
2
ARM
PET MODE/
NIGHT MODE
1
3
AWNING/
DOME
LIGHT
4
SENTINEL ALARM & TRACKING
5 Awning Light*
Arming/Disarming the alarm will activate the awning light for
30 seconds. Button 4 on the remote will also activate the light
for 5 minutes before automatically turning o.
*Typically awning light control will only be possible with factory installations.
*Please note: Sensor exclusion is bound to a single arming cycle. Sensors
will automatically be enabled the next time the alarm is armed.