Mowrator S1 - Page 23

20
Protection item
Triggering conditions
Machine action
Release condition
Tilt protection
The body tilt angle is
greater than 40°.
Stop the blade
rotation and
walking.
The body tilt angle
is less than 35°.
Crash protection
The bumper sensor is
triggered when it hits an
obstacle.
Stop the blade
rotation and
walking.
Manually release
protection
according to the
prompts on the
remote controller
screen.
Warning for
obstacles
(from ultrasonic
detection)
Obstacles are detected in
any direction from the
front, left or right, from
1ft.(30cm) to 3ft.(90cm)
away from the machine.
Limit speed or stop
for movement in
this direction.
Move in the opposite
direction to the
obstacle to release
it.
Stop for
obstacles
(from ultrasonic
detection)
Obstacles are detected
within 1ft.(30cm) from
the machine in any
direction from the front,
left or right.
Stop the blade
rotation and
walking.
Move in the opposite
direction to the
obstacle to release
it.
Error for the
cover opening of
the grass outlet
The cover of grass outlet is
opened.
Stop the blade
rotation and
walking.
Close the cover of
grass outlet, or
hang the grass bag.
Warning for
remote over
range
The distance between the
remote controller and the
robot exceeds 65ft., but
does not exceed
164ft.(turn on the
Limit forward
speed and prohibit
backward.
Movement.
remote controller
returns within 20m.