18. Do not charge the battery in a humid environment or areas easily accessible by
non-operators. When charging, please check whether the power socket, power cord, and
charging interface are intact and suitable.
19. Under any circumstances, it is prohibited to damage or scrap machines or battery
packs by incineration, shredding, submersion, concealment and abandonment. Such
actions may lead to fires, explosions or environmental pollution that are difficult to
prevent and may lead to unpredictable consequences, such as personal and property
damage. Please strictly abide by local laws, regulations and environmental protection
regulations when disposing of damaged or scrapped machines.
20. Do not attempt to modify this machine or install accessories that are not
recommended for use with the machine. Any such changes or modifications would
constitute misuse and could result in a hazardous situation that could result in serious
injury.
21. If a situation not covered by this manual occurs, please be careful and handle it
properly, and always maintain safety vigilance.
22.If you lend this tool to others, please also lend them this user manual and ask them to
strictly follow the manual to prevent damage caused by misuse of the product.
Before starting the machine, please cut off the power and make the following
preparations:
1. Please check whether the blade is installed correctly, whether the blade screws are
tight, and whether the blade is bent, cracked, worn or otherwise abnormal. If so, please
replace the MOWRATOR special blade according to the manual instructions before
operating the machine.
2. Please check whether protective devices, such as the grass outlet cover and the
grass bag, are intact, in place and working properly.
3. Please check the machine for abnormal noises, loose screws, incorrect component
installation and other mechanical structural abnormalities.
4. Please check the work area for stones, toys, fabrics, branches, sticks, faucets, wires
and other debris or any other objects that may interfere with machine operation.
5. Please check whether there are any pits, protrusions or other abnormalities in the
working area. Uneven terrain may cause the machine to be stuck or cause damage,
leading to hidden dangers.
To Next Page
Loading...