Moxa Technologies MGate MB3270I Quick Installation Guide

- 3 -
Reset Button
Press the Reset button continuously for 5 sec to load factory defaults:
The reset button is used to load factory defaults. Use a pointed object
such as a straightened paper clip to hold the reset button down for five
seconds. Release the reset button when the Ready LED stops blinking.
Panel Layouts
The MGate MB3170 has a male DB9 port and a terminal block for
connecting to serial devices. The MGate MB3270 has two DB9 connectors
for connecting to serial devices.

Moxa Technologies MGate MB3270I Specifications

General

Brand	Moxa Technologies
Model	MGate MB3270I
Category	Gateway
Language	English