Need help?Do you have a question about the Moxa Technologies NPort 4511 and is the answer not in the manual?
General| Model | NPort 4511 |
|---|---|
| Category | Gateway |
| Serial Interface | RS-232/422/485 |
| Number of Serial Ports | 1 |
| Baud Rate | 50 bps to 921.6 Kbps |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Power Input | 12 to 48 VDC |
| Humidity | 5 to 95% (non-condensing) |
| Ethernet | 10/100 Mbps |
| Flow Control | RTS/CTS, XON/XOFF |
| Certifications | CE, FCC, UL |
| Protocols | TCP/IP, UDP, HTTP, Telnet |
| Connectors | RJ45 for Ethernet |
Highlights key capabilities and specifications of the NPort 4511.
Detailed technical specifications for the NPort 4511 hardware.
Step-by-step guide for connecting the power adapter.
Guide to connecting the NPort 4511 to a network hub or switch.
Instructions for direct connection of the NPort 4511 to a PC.
Details RS-232 connector pin assignments and loopback testing.
Configuration of operation modes using DIP switch SW1.
To Next Page
