Moxa Technologies NPort 4511 - Operation Mode Introduction; Developing Mode; Running Mode

5-2
Operation Mode Introduction
NPort 4511’s two Operation Modes are described in the following subsections.
Developing Mode
Developing Mode is used when configuring NPort 4511 and when developing
and/or downloading a program. The following functions are available when
NPort 4511 is in Developing Mode:
 Run/Stop NPort 4511’s program manually for testing and debugging
 Configure NPort 4511
 Download a program
 Monitor program behavior
 Upgrade firmware
Running Mode
Running Mode is used during NPort 4511’s normal operation. The following
functions are available when NPort 4511 is in Running Mode:
 Activate a program automatically after NPort 4511 is powered on
 Configure NPort 4511
 Download a program
 Monitor program behavior
 Upgrade firmware