Moza CS V2 - Install Heightening Block for Magnetic Paddle; Install Silence Pad for the Magnetic Paddle; Packing Details; Product Parameters

04
Install Heightening Block for Magnetic Paddle
Placethe steeringwheel on a flat surfacefacing down,use a hexagonal wrenchto remove thescrew on the side
of the trigger lever of the shiftpaddle,and then use a wrenchto lift the latch fromthe side of the magnetic
paddle, and pull the triggerlever of the paddle outward to obtainthe best space for disassembling and
assembling paddles; use a hexagonal wrench to removethe screws on the shift paddles,put on the heightening
block and tightenwith the long screws, andfinally put the latch back in place and tighten the screws.The
heightening block can help shorten thedistance between the magnetic shifter paddles and hands by8mm.
05
Install Silence Pad for the Magnetic Paddle
Placethe steering wheelon a flat surface, with the front facing down. Use a hexagonal wrench toremove the
screwon the side of the trigger lever,then use a wrench to liftthe latch from the side of the magnetic paddle
(NOTE: you do not need to push it out completely.Justseparating thetrigger lever and the latch is fine). Apply
the silencer pad on the back of the magnetic hole and the squarehole on the shifterpaddle(if it is
inconvenientto operate, you can lift the latchcompletely).Do not apply the silencer pad on the square hole
because this is the photoelectrictrigger area. Finally, return the latch into place and tighten the screws.
06
Packing Details
1.CS V2 Steering Wheel
2. Tool kit: Hexagonal Wrench / 8mm aluminum heightening block x 2 / Silence pad x 4
07
Product Parameters
Grip Material: microfiber leather
Frame Material: aluminum
Face Plate Material: aluminum
Magnetic paddle Material: forged carbon fiber Size:
13 inch
Magnetic Paddle: 2 pcs Mechanical
Keys: 6
Front-Facing knobs: 2 pcs (20-segment embedded
steel ball type)
Universal Joystick: 2 pcs (pressable)
Highlighted LED RGB Light Beads: 10 pcs LED Color:
7 colors for customization Intelligent Telemetry:
yes
Adjust Lighting though MOZA Pit House: yes Quick
Release: yes
Power Supply Method: wireless and wire Signal
Transmission Method: wireless Magnetic paddle
sensor: contactless photoelectric sensor