MPK VisionVent M pro User Manual

1 Issue 01.2021
MPK Metall- und
Plastikverarbeitung GmbH & Co. KG
Friedrich-Ebert-Str. 298-300
D-58566 Kierspe
mpk-kierspe.de
Rooflight with pleated blind and net
for installation in caravans and mobile homes
VisionVent M pro LED
Technical data:
EN Installation and Operating Instructions
Please read the instructions carefully before installing the rooflight and store
it for future.
We cannot be held responsible for incorrect fitting, handling or operation.
Any product faults relating to the production and materials used should be notified to us via
an authorised dealer immediately.
Included with delivery
1x Rooflight with outer frame
1x Inner frame with LED, polyswitch fuse, connection cable
1x Fixing parts (8x fixing brackets and 4x large plastic screw)
Additionally required for installation (not included in delivery)
1x Elastic sealant adhesive, e.g. Dekalin Dekaseal 8936 or SikaLastomer®-710
8x Fixing screws for the upper frame - Pan 3,5 mm / head according to DIN ISO 7049
(DIN 7981) / The length of the screw should be determined by the roof thickness, plus
approximately 10 mm for the screw to enter the upper frame.
With timber support under the roof lining:
4x Fixing screws for the inner frame:
Pan 3,5 mm / head according to DIN ISO 7049 (DIN 7981) / length max. 10 mm
Explanation of symbols
Safety and installation instructions
 Check the roof thickness of your vehicle before mounting.
 The rooflight should only be fitted to a flat roof surface, both internally and
externally.
 Choose a fitting position that will not interfere with other roof mounted components
(e.g. roof-racks/antenna's etc.) and avoid internally installed electrical cables and
furniture, which could impede the correct operation of the rooflight.
Inner frame
 Make sure that there is a suitable supply line and switch for the lighting in the vehicle.
 Never stand on the dome of the rooflight!
Do not open the rooflight while driving. The rooflight must be locked down before
traveling.
 Do not open the rooflight in strong wind or rain .
 Close the rooflight during rain and snowfall.
Aperture
400 x 400 mm
Roof thickness
24-56 bzw. 42-70 mm
Corner radius
23 mm
Site dome
560 x 560 mm
Height over roof
96 mm
Ventilation
150 cm²
Weight
4,0 kg
Size inner frame
565 x 530 x 35 mm
Outer frame material
Polypropylene
Dome material
PC + SAN
Speed limit
130 km/h
Authorization
ECE R43 -019650
LED-light
394 x 9 x 2,5 mm
Light color
~ 3000 K (warmwite)
Energy efficiency class
A+
Nom. useful liminous flux
2 x 390 lm
Voltage
12 -14V DC
Condumption
2 x 4,2 kW/h / 1000h
Nominal lifetime
10.000h
No. of switching cycles
50.000
Warm up time
<1sek.
Nominal beam angle
60°
NOTE
Particulary important information.
ATTENTION!
Failure to observe can lead to material damage.
WARNING!
Safety note: Serious risk of injury.

MPK VisionVent M pro Specifications

General

Brand	MPK
Model	VisionVent M pro
Category	Lighting Equipment
Language	English

Summary

Safety and Installation Instructions

General Safety Notes

Provides critical safety guidelines including checking roof thickness, fitting to flat roofs, and avoiding interference with other components.

Electrical Safety

Ensures a suitable supply line and switch for lighting is available and warns against standing on the rooflight.

Operating Precautions

Advises on rooflight operation during driving, wind, and rain, emphasizing locking and closing procedures.

Installation Procedure

Frame Preparation and Sealing

Instructions on cleaning frames, following sealant manufacturer guidelines, and fitting the outer frame to the roof aperture.

Securing the Outer Frame

Details on placing and securing fixing brackets with screws, noting torque limits and removing corner bracket tabs.

Inner Frame Installation

Guidance on releasing cover profiles, connecting the inner frame's LED lighting and polyswitch cable, and positioning it correctly.

Operation

Opening and Closing

Describes how to open the rooflight by pressing locking buttons and pushing handles, and how to close it.

Blind Usage During Driving

Recommends keeping pleated blinds open while driving to avoid noise and damage, and partially open during the day for ventilation.

Cleaning Instructions

Dome Cleaning

Explains how to remove the dome for cleaning, emphasizing the use of clear water and a soft sponge, and avoiding solvents.

Blind Cleaning

Advises cleaning pleated blinds with a soft brush or dry cloth, warning against wet cleaning to prevent damage to screens.