MPM MBL-31 - Technical Data

15
GB
2. Each me before and aer using, disassemble the appliance and wash its parts in warm water with
detergent, rinse and dry them thoroughly.
3. They should not be used in washing machines.
4. Periodically check all operang components of the appliance before using them. Do not use the
blender if the blades got stuck or rotate with diculty. Turn them clockwise to check if they op
-
erate properly. Be careful no to get injured. The blades should rotate easily.
5. Do not use the appliance if the jug gets damaged, leaks or has fractures of cracks. Otherwise it
may crack while in use.
6. In order to clean the blender housing unplug the appliance and then wipe it with a damp cloth.
If water gets to the top of the appliance, it will go down and through the drain hole under the
housing.
7. The motor does not require any addional maintenance. Do not clean the appliance using harsh
or abrasive cleaning agents, materials or steel wool, which may cause damage.
TECHNICAL DATA
Technical parameters are indicated on the product nameplate.
Maximum me of operaon: KB Max = 2 min.
Noise level: L
WA
= 80,5 dB
Length of power cord: 0.9 m
NOTE! MPM agd S.A. reserves its right to modify the technical data.
Proper disposal of the product (waste electrical and electronic equipment)
This symbol on the product indicates that the product, aer its lifeme, should not be dis-
posed with other household wastes. To avoid harmful inuence on the environment and hu-
man health due to uncontrolled waste disposal, dispose the waste device to the service point
of waste household appliances or report collecng it from home. In order to obtain detailed
informaon about the locaon and how to dispose the waste electrical and electronic equipment in
a safe way, contact your retailer or local Department of Environmental Protecon. Do not dispose the
device with other municipal waste.