11
GB
APPLIANCE OVERVIEW
1. Top lid
2. Coffee grinder cover
3. Coffee jug heat plate
4. Glass coffee jug
5. Jug handle
6. Jug lid
7. Coffee maker mode selector
- Fine Grind + Brew
- Coarse Grind + Brew
- Coffee Powder
- Stop
8. Backlit power switch (START)
9. Drip stop valve
10. Water tank
11. Water tank handle
12. Coffee grinder chamber
13. Coffee grinder filter cage
14. Coffee spoon and brush
15. Housing
BEFORE FIRST USE
1. Remove the coffee maker from the
packaging. Remove all plastic bags,
fillers, safety locks and packaging
labels.
2. Inspect the coffee maker for damage which may have been caused in transport. If you sus-
pect that the coffee maker is damaged, do not use it. Consult the seller.
3. Verify that your power mains match the nameplate ratings of the coffee maker.
4. Wash the coffee maker and do a brewing cycle with water only. Follow Section “CLEANING
AND MAINTENANCE”.
5. Place the coffee maker on a firm, dry, stable, flat and level surface.
USING THE APPLIANCE
1. Open the top lid and pour as much cold potable water into the water tank (10) as you need.
Check the filling level with the graduated water level gauge on the water tank. The marks
1, 2, 3, and 4 (MAX) correspond to the number of standard coffee cups (ca. 150, 300, 450, and
600 ml, respectively).
CAUTION! Do not exceed the maximum water level of the tank (the MAX mark). Do not pour any water into the
coffee grinder chamber (12).
2. Install the filter cage (13) in the coffee grinder chamber (12). The filter cage has a handle to
facilitate installation in and removal from the coffee grinder chamber.
13
12
2
14
4
5
6
11
10
9
1
8
3
7
15
To Next Page
Loading...
Need help?
General
