MPM MPE-10/T User Manual

16
EN
DESCRIPTION OF THE CONTROL PANEL
BAKING TIME CONTROL
The (2a) knob can be used to set the baking time in the oven between 0 and 90 min-
utes. As baking progresses the knob will be moving to the “0” position. At any mo-
ment you can turn the knob to the “0” position forcing the oven to switch off.
The setting of the knob to the “0” position causes the oven to switch off without counting the
time.
TEMPERATURE REGULATION
With the knob (2b) you can set the baking temperature in the oven between 40°C to
over 220°C (MAX). After reaching the set temperature the oven’s thermostat turns the
heats on and off in order to maintain the set temperature.
OVEN MODE SELECTION KNOB
The appropriate icons on the knob (2c) signal the selection of the heat and air flow.
Remember, however, to declare the time and temperature beforehand since select-
ing only the oven mode will not start the process of baking.
Baking only with the bottom heat. This option can be applied to baking a pizza or dish-
es which require browning at the bottom.
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r
Baking only with the top heat. Can be applied when the priority is baking of the top part
of the dish.
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r
Baking with both top and bottom heat. The dish is baked both on the top and bottom
part.
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r
Baking with the top and bottom heat with the air flow function. Thanks to the air circula-
tion the heat is equally distributed in the oven. It has application for baking of such
dishes as cakes, pâtés, goulashes in forms or on trays.
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r
Baking with the top and bottom heat with the air flow function. Thanks to air circulation
the heat is equally distributed in the oven. To cook the bottom part of a crispy pitta or
spicy pancake.
BEFORE FIRST USE
14. Take out the oven from the box and remove all fillers, transport assisting materials and labels.
Check the oven for any damages that might have occurred during transport. If you have any
doubts contact the seller.
15. The oven must be placed on a level, flat, stable and dry surface that is resistant to high tem-
perature. Keep appropriate distance around the oven Do not put and do not start the oven
inside cabinets, shelves or other pieces of furniture.
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r
TECHNICAL SPECIFICATIONS
Hotplate (Cooking Plate)
Timer
Thermostat
Programmer
Timer:
Enables adjusting of cooking time. When the set time has expired, timer shall cut off the
power of the heaters and provide a warning with a tingling sound. Set the timer,
program and thermostat buttons to
“0” to turn off your appliance.
When the timer is set to , it shall operate indefinitely.
Thermostat:
Thermostat ensures a temperature from 40 to 220 °C inside the oven. Used with oven
program function button. When the temperature in your oven reaches the set value, the
thermostat will break the circuit and thermostat light will go off. If the temperature drops
below the set temperature, the thermostat will be activated and the indicator light will
illuminate.
Programmer:
Allows you to select oven functions. Functions are described in the next section. The
function selection button and oven thermostat button shall be set to a desired
temperature rate. Otherwise selected function button does not operate. Hotplate and
oven functions do not operate simultaneously.
Chicken roast function:
Only chicken roast motor operates. Provides chicken roast by rotating the
skewer. Grill heater can also be used for roasting.
Hotplate Programmer:
Enables selection of Hotplate (Cooking Plate) functions.
Hotplates can be controlled from a single button or individual buttons. Does not
operate with oven functions simultaneously.
Single button
control of
coffee hotplate
Single button
control of 2
hotplates
Single button
control of 3
hotplates
Incremental power
control of large
hotplate
Incremental power
control of small
hotplate
Top heater
Bottom Heater
Bottom and Top Heater
Bottom heater and Turbo Fan
Turbo Fan
Bottom and Top heater and Turbo fan
Bottom Heater and Turbo Fan
Grill Heate r

MPM MPE-10/T Specifications

General

Grill	-
Oven size	Small
Oven type	Electric
Top heating	Yes
Number of ovens	1
Total oven power	1650 W
Number of shelves	1 shelves
Oven thermostat range	40 - 230 °C
Total oven(s) interior capacity	37 L
Door hinge	Left
Cord length	0.8 m
Control type	Rotary
Door material	Glass
Product color	Black
Built-in display	No
Control position	Front
Oven door opening	Drop down opening
Appliance placement	Countertop
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Energy consumption (forced convection)	- kWh
Timer type	Mechanical
LED indicators	Status
Timer duration	90 min

Weight and Dimensions

Depth	460 mm
Width	535 mm
Height	335 mm
Installation compartment height	- mm
Interior dimensions (W x D x H)	400 x 410 x 256 mm