Why my MPM Air Conditioner does not function?
If your MPM Air Conditioner is not working, ensure it's properly connected to a power outlet and switched on. If “P2” flashes on the display screen, it indicates that you need to drain the water. Also, check if the timer-off function is running; if so, wait three minutes before turning the unit on.
What to do if my MPM MPM-09-KPO-02 restarts frequently?
If your MPM Air Conditioner restarts frequently, several factors could be responsible. It might be in direct sunlight, so try closing the curtains. Open windows or doors, a crowded room, or a heat source can also cause this issue; close any openings and remove heat sources. A dirty filter could be the culprit, so clean or replace it. Finally, check for any blockages at the air inlet or outlet and remove them.
Specific guidelines for safe and optimal placement and usage of the appliance.
Guidance on choosing a suitable flat, dry surface with adequate surrounding space.
Steps for attaching the exhaust pipe and window slider kit for operation.
Identification of parts visible on the front of the air conditioner unit.
List and visual identification of all included accessories like exhaust pipe, adapter, and window kits.
Instructions on how to use the control knob and understand indicator lights.
Explanation of the self-evaporative system and manual drainage procedure.
Guidelines for cleaning the appliance housing and air filter.
Steps for proper storage and maintenance of the unit at the end of the season.
Information on the correct disposal of the product as used electrical and electronic equipment.
General| Brand | MPM |
|---|---|
| Model | MPM-09-KPO-02 |
| Category | Air Conditioner |
| Language | English |
To Next Page
