Why my MPM MPM-07-KPO-01 does not function?
If your MPM Air Conditioner is not working, ensure it's properly connected to a power outlet and switched on. If “P2” flashes on the display screen, it indicates that you need to drain the water. Also, check if the timer-off function is running; if so, wait three minutes before turning the unit on.
What to do if my MPM MPM-07-KPO-01 restarts frequently?
If your MPM Air Conditioner restarts frequently, several factors could be responsible. It might be in direct sunlight, so try closing the curtains. Open windows or doors, a crowded room, or a heat source can also cause this issue; close any openings and remove heat sources. A dirty filter could be the culprit, so clean or replace it. Finally, check for any blockages at the air inlet or outlet and remove them.
Key safety guidelines for appliance usage, handling, and maintenance to prevent hazards.
Guidelines for choosing a suitable, flat, and dry place for the air conditioner, ensuring adequate space.
Steps to connect the exhaust pipe to the unit and window slider kit for proper operation.
Detailed identification and description of parts on the front of the appliance.
Identification and description of components located on the back of the air conditioner unit.
Listing and identification of all accessories provided with the portable air conditioner.
Identification and explanation of the buttons, indicators, and controls on the appliance's panel.
Step-by-step guide on how to operate the air conditioner functions and any specific usage notes.
Explanation of the self-evaporative system and the procedure for draining accumulated water.
Guidelines for cleaning the appliance housing and the air filter to ensure optimal performance and longevity.
Procedures for preparing the unit for storage at the end of the operating season, including draining and cleaning.
A guide to identify and resolve common problems encountered during the operation of the air conditioner.
Detailed technical data and specifications for both MPM-09-KPO-02 and MPM-07-KPO-01 models.
Information on the proper and environmentally responsible disposal of the product as electronic waste.
Key safety guidelines for appliance usage, handling, and maintenance to prevent hazards.
Guidelines for choosing a suitable, flat, and dry place for the air conditioner, ensuring adequate space.
Steps to connect the exhaust pipe to the unit and window slider kit for proper operation.
Detailed identification and description of parts on the front of the appliance.
Identification and description of components located on the back of the air conditioner unit.
Listing and identification of all accessories provided with the portable air conditioner.
Identification and explanation of the buttons, indicators, and controls on the appliance's panel.
Step-by-step guide on how to operate the air conditioner functions and any specific usage notes.
Explanation of the self-evaporative system and the procedure for draining accumulated water.
Guidelines for cleaning the appliance housing and the air filter to ensure optimal performance and longevity.
Procedures for preparing the unit for storage at the end of the operating season, including draining and cleaning.
A guide to identify and resolve common problems encountered during the operation of the air conditioner.
Detailed technical data and specifications for both MPM-09-KPO-02 and MPM-07-KPO-01 models.
Information on the proper and environmentally responsible disposal of the product as electronic waste.
General| Brand | MPM |
|---|---|
| Model | MPM-07-KPO-01 |
| Category | Air Conditioner |
| Language | English |
To Next Page
