40
EN
TECHNICAL DATA
The technical parameters are given on the data plate of the product.
ATTENTION! MPM agd S.A. reserves its rights to modify the technical data.
To obtain product information using a smartphone or tablet, scan the QR code on the ener-
gy efficiency label and open the link to go to the product database.
In addition, information can be obtained by visiting the following sites and sear-
ching for the model ID that you can find on the energy label below the QR code:
https://eprel.ec.europa.eu/
A
A
Informacji na temat modelu
(*)
PROPER DISPOSAL OF THE PRODUCT (waste electrical and electronic equipment)
Poland
Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be handed-over to
a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points,
the user should contact the municipal point of electric waste collection or used equipment processing department.
To Next Page
Loading...
