EasyManua.ls Logo

MPM MUG-20 - Cleaning and Maintenance

MPM MUG-20
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
EN
operation when the room temperature drops. Activation of the thermostat is indicated by
the control lamp (3).
6. In order to use the heater continuously, without the thermostat control, set the thermostat
knob to the maximum position.
7. After completing the work, turn both knobs to the initial position and disconnect the device
from the mains supply.
8. Before storing the device, make sure it is completely cooled down.
CLEANING AND MAINTENANCE
CAUTION! Before cleaning, always unplug the fan heater from the mains outlet and wait until it has completely
cooled down.
CAUTION! Do not submerge the fan heater in water or other liquids!
1. Clean the outer housing surfaces with a damp lint-free cloth. Use a bit of a gentle detergent
to remove persistent grime. Wipe the housing dry when clean.
2. Remove the dust from the front grille and the cold air intake with a vacuum cleaner set to
low suction.
3. This appliance features no user-serviceable parts. Do not attempt to open the housing. It may
damage the electric motor of the fan and the PTC heater, and void your product warranty.
INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS:
Model identifier: MUG-20
Item Symbol Value Unit Item Unit
Heat output Type of heat input, for electric storage local space
heaters only
Nominal heat output Pnom 2,0 kW manual heat charge control, with integrated
thermostat
NO
Minimum heat
output (indicative)
Pmin 1,0 kW manual heat charge control with room and/or
outdoor temperature feedback
NO
Maximum continu-
ous heat output
Pmax,c 2,0 kW electronic heat charge control with room and/or
outdoor temperature feedback
NO
Auxiliary electricity consumption fan assisted heat output NO
At nominal heat
output
el
max
N/A kW Type of heat output/room temperature
control
At minimum heat
output
el
min
N/A kW single stage heat output and no room tempera-
ture control
NO
In standby mode el
SB
0,000 kW two or more manual stages, no room tempera-
ture control
NO
with mechanic thermostat room temperature
control
YES
with electronic room temperature control NO

Related product manuals