Page 9
Note
Bluetooth icon is shown on notication bar when turned on.
Note
Refer to user’s manual of Speaker or headphone for pairing modes.
This device can connect to Bluetooth speaker and headphone that supports A2DP, AVRCP profiles.
Select “Setting” on main menu. Press [▶] to enter, select “Bluetooth” and press [▶].
Select “Bluetooth status” and press [▶] to show on/off menu.
Press [Backward/Forward] to select On/Off and press [▶] to turn on or off.
Turn on/off Bluetooth
Set “Pairing mode” of Bluetooth speaker or headphone.
Go to “Device search” and press [▶] to show “Please wait” message. Wait until this message disappears.
(Time for searching device depends on number of devices nearby and it can take up to 1~3 minutes depending
on the environment).
Pairing device
Connecting to Bluetooth speaker/
headphone
To Next Page
Loading...
