How to charging the battery inside the frame and pull out the battery
Before using the charger locate the voltage selector switch (Li-lon) on the back of the charger. Select either
115 Volts or 230 Volts depending on the country you reside in. Using the wrong Voltage setting will
permanently damage the charger and/or electrical components on the hybrid electric bicycle.
1.Use the matching charger,insert the round plug into E-bike first
2.Then insert the charger plug into electrical socket
3.Under Charging, the right situation is Red Light on (attention: during the charging, if the green light on means wrong,
while when the battery charged full, the green light on.)
4.Under the frame,there is another hole for lock and unlock the battery,if you want pull out the battery,use the key to unclock it,
then you can pull the battery out.
Notes:
1.The battery is removable: the battery can be charged inside of the e-bike frame and can be also pulled out to charge separately.
2.Anti-theft system of the battery: there is hole under the frame, where we can use the key to lock it, which can keep the battery
from stealing.
3. LG battery, the core inside is produced by LG, and imported from Korea. We have the certificate to prove it.
11 12
To Next Page
Loading...
