MPMan MP127 - System Settings; System Setup Parameters; System Time Configuration; Power Off Settings

3.7 System Set (Setup)
The SETTING option allows to access to MP3 Player setup system. To access at system setup please follow
here below instruction:
The parameters available in the setup system are:
Clock:
This option allows setting of the system date and time.
LCD set:
This option allows setting the brightness, darkly and black screen of the LCD panel.
Language:
This option allows setting the Language of the User Interface.
Power Off:
This option allows setting the off time and sleep time.
Memory Info:
This option allows checking the memory usage.
Firmware Ver:
This option allows checking the firmware version.
Firmware Upg:
This option allows to upgrade the firmware.
3.7.1 System Time Set
This option allows setting of the system date and time. The upper case display the date in Year : Month : Day
Format, and the lower case display the Time in Hour : Minute : Second format. To change the Date and time,
please follow here below instruction:
1. Under the SYSTEM MENU, choose SYSTEM TIME by pressing [] or [] and press [M] to confirm
2. Press [] or [] to choose the parameter you want to adjust
3. press [VOL+] and [VOL-] to change the value. Press MENU [M] to confirm.
3.7.2 Power Off Set
This option allows setting the off time and sleep time. By setting Off Time, it is possible to enable (10s, 20s,
30s, 40s, 50s, 60s, 70s, 80s, 90s, 100s, 110s, 120s, 130s, 140s, 150s, 160s, 170s, 180s, 190s and 200s) or
disable the power management features to automatically shut down your player if it is not used. By setting
Sleep Time, it is possible to set power off the unit after a specified time (10s, 20s, 30s, 40s, 50s, 60s, 70s,
80s, 90s, 100s, 110s, 120s) from the moment you confirm about this selection.
To modify this parameter please follow here below instruction:
1. Under the SYSTEM MENU, choose POWER OFF by pressing [] or [] and press PLAY [].
2. By using the [] or [] buttons, select OFF TIME or SLEEP TIME and press [M] button.
3. Choose the desired OFF TIME or SLEEP TIME and press [M] to confirm.
1. Power ON the MP3 player, button, the screen will display the main menu.
2. By using the [] or [] select SYSTEM option then press [M] button to
enter the SYSTEM MENU.
3. By using the [] or [] select the system setup parameter and press
MENU [M] button.