Mpow BH298A User Manual

4.Bluetooth Automatic Reconnection
When the distance is within the Bluetooth range again or BH298 powers on again, BH298 enters reconnection
status with indicator light flashing quickly. BH298 will reconnect to the last connected smartphone with
Bluetooth
enabled. If the reconnection fails in 30 s, BH298 will enter pairing mode automatically. During the
reconnection
status, you can start to pair via your smartphone by manual.
S.Clear Bluetooth Pairing List
In power-on state, long press the" + " and • - • buttons simultaneously for 8 seconds until the red
indicator light stays on for 2s. Then, BH298 will clear the pairing list paired before and enter pairing mode (The
pairing list can't be cleared in power-off state).
Note
Please clear pairing information of BH298 on your smartphone simultaneously to reconnect quickly.
14
6.Disconnect the Current Connection
Long press the • HI • button for 3 seconds to disconnect the current devices. Then, BH298 enters pairing mode
with the indicator flashing quickly.
7.low Power Prompt
When BH298's battery is below 3.2v, it will automatically power off with red indicator flashing 5 times.
8.Charging
When BH298 is in low power or can't power on, you can charge it via a DC 5 V USB charging cable. The red
indicator light stays on during the charging process and goes off when the charging is complete. BH298 can
keep working during charging.
15

Mpow BH298A Specifications

General

Brand	Mpow
Model	BH298A
Category	Receiver
Language	English