Need help?Do you have a question about the Mpow BH437A and is the answer not in the manual?
General| Model | BH437A |
|---|---|
| Type | Over-Ear |
| Driver Size | 40mm |
| Impedance | 32Ω |
| Frequency Response | 20Hz-20kHz |
| Microphone | Yes |
| Foldable | Yes |
| Connectivity | Bluetooth 5.0 |
| Charging Time | 2 hours |
Earbuds automatically power on when opening the charging case, indicated by white LED flashing.
Manually power on by simultaneously pressing and holding the MFB of both earbuds for 2 seconds.
Power off by placing earbuds into the charging case and closing the lid.
Manually power off by pressing and holding the MFB of both earbuds for 5 seconds.
Earbuds enter pairing mode automatically when the charging case is opened.
Manually enter pairing mode by turning on earbuds and double-touching the right earbud's MFB.
Press and hold the MFB of the right earbud to increase volume, left to decrease.
Double-touch the MFB of the right earbud for next track, left for previous track.
Single-touch the MFB of either earbud to play or pause music.
Double-touch the MFB of either earbud to answer or hang up an incoming call.
Press and hold the MFB of either earbud for 1 second to reject an incoming call.
Triple-touch the MFB of either earbud to activate Siri or other voice assistants.
To Next Page
