Mpow Flame Lite User Manual

1. The earphones automatically turn on(with white LED l ight flashing} and start pairing when you
open the charging case.
2. In the shutdown status and when the earphones are not in the charging case, simultaneously
press and hold the MFB of both earbuds for 2 seconds to power on ( with the white LED light
fishing).
POWER OFF
1. Put the earphones back In the charging case and c lose the case to tum them off.
2. If the earphones are not in the charging case. just press and hold the MFB of both earbuds for 5
seconds ID power them off. (Mode 2 ran not be conducted during music playing or calling.
PAIRING

Mpow Flame Lite Specifications

General

Bluetooth Version	5.0
Water Resistance	IPX7
Type	In-ear
Connectivity	Wireless
Wireless Technology	Bluetooth
Frequency Response	20Hz-20kHz
Impedance	16Ω
Charging Time	2 hours
Playtime	Up to 5 hours
Driver	6mm dynamic driver
Bluetooth Range	10 meters
Battery Life	Up to 30 hours with charging case