Need help?Do you have a question about the Mpow FLAME2 and is the answer not in the manual?
General| Bluetooth Version | 5.0 |
|---|---|
| Charging Time | 2 hours |
| Waterproof Rating | IPX7 |
| Driver | Dynamic |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 16Ω |
| Microphone | Yes |
| Foldable Design | No |
| Ear Cushion Material | Silicone |
| Bluetooth Range | 10 meters |
Connect the Mpow Flame2 to your phone for the first time via Bluetooth.
Connect the Mpow Flame2 to a second device after initial setup.
Instructions for long-term storage and initial charging of the earphones.
Guidance on proper care and storage to maintain the product.
To Next Page
