MPS Astro - Page 4

Remove Suction Protection Cap.
Fit the Filter to the collection tray and slide tray up to
clip into position.
Installing
Insert and slide to lock pump module into
position.
Make sure the end of the drain hose is within the tray
and ensure flow is unrestricted.
Testing
WARNING! Thepumpisliveduringtesting,other
powercircuitsmayalsobelive.
Testthepumpoperationbyslowlypouringwaterinto
theairhandlercondensatecollectiontray,ensuringthe
waterdrainsintothepumpcollectiontraywithout
restriction.
Continuetopouruntilthewaterbridgesthesensor
andthepumpwillbegintopumpawaythewater. The
pumpwillstopautomatically.Repeatuntilwatercan
beobservedenteringthefinaldrain.
Checkforleaks.
FittheCover.