mPTech myPhone Halo EASY User Manual

© mPTech 2018. All rights reserved. Halo EASY – EN
21
15
<#> button
Allows you to switch between audio
modes and character input modes
while writing a text message.
16
<*> button
Used to lock the keyboard and change
slider values, text options, etc. When
writing an SMS, it displays symbols for
insertion into the content.
17
Gap
Allows to take off a cover of the phone.
18
Microphone
Do not cover it with your hand while on
the phone.
19
Headphone
port (minijack
3.5 mm)
It allows you to connect headphones to
your phone, so you can listen to the
radio (improve the quality of reception
- act as an additional antenna), music,
and also make calls (when headphones
are equipped with a microphone).
20
MicroUSB
port
When connected, the charger enables
recharging the battery. You can
transfer data (photos, videos, music)
when you connect it to your computer.
Turning the phone on/off
To turn the phone on/off press and hold the <Red handset>
button. If directly after turning the phone on you will see the code
request, (in form of “****”) type the code and press <Menu>
button.
Inserting a SIM card, memory card, and the battery
If the phone is switched on - switch it off. Remove the case's back
flap - use your fingernail to raise it using the gap in the case.
Insert the SIM card - It is supposed to be placed with its gold
contacts facing down, the way in which the slot is embossed.
Insert the memory card - to open the flip of the card reader slide
it delicately upwards. Insert the microSD memory card with its
gold contacts facing down, the way in which the slot is embossed.

mPTech myPhone Halo EASY Specifications

General

Brand	mPTech
Model	myPhone Halo EASY
Category	Cell Phone
Language	English