EasyManua.ls Logo

MQ Multiquip HTX6H - User Manual

MQ Multiquip HTX6H
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EXCLUSIVE TO
FOR MORE INFORMATION
CONTACT US ON 1300 353 986 OR VISIT flextool.com.au
SERVICE MANUAL
®
MQ WHITEMAN RIDE-ON TROWEL
MODEL HTX6H AND STX6H
U.S. Revision #1 (09/07/17)
AUS Version 1.0 (July 2021)
Question and Answer IconNeed help?

Do you have a question about the MQ Multiquip HTX6H and is the answer not in the manual?

Summary

Machine Information and Maintenance Log

Safety Information

Safety Messages and Symbols

Explains hazard symbols and safety messages for risk communication.

General Operational Safety

Outlines rules for safe operation, personal protection, and general warnings.

Engine and Fuel Safety

Details hazards related to engine operation, fuel handling, and hot parts.

Battery and Transport Safety

Covers battery handling, equipment lifting, and safe machine transport.

Towing Safety

Provides specific regulations and procedures for towing the equipment.

Environmental and Emissions Safety

Addresses decommissioning, disposal procedures, and diesel emissions.

Tools Needed

Machine Information

Model and Serial Number Identification

Locating model and serial numbers for correct identification.

General Procedures

Setup Jumper Installation and Management

Procedures for installing and removing the setup jumper for operational control.

Service Tool Function Control

Using the service tool to disable or re-enable specific machine functions.

Initial Check and Adjustments

Hydraulic Oil Level Check and Fill

Step-by-step guide for checking and filling hydraulic fluid.

Engine Oil Level Check and Fill

Step-by-step guide for checking and filling engine oil.

Engine Coolant Level Check and Fill

Step-by-step guide for checking and filling engine coolant.

Service Tool Setup and Connection

Whiteman Service Tool (WST) Installation

Guide to installing the WST software and obtaining a license key.

Laptop Configuration and Driver Installation

Connecting the CAN gateway and installing necessary drivers on the laptop.

Loading Software

File Download Procedure to MCU

Process for transferring software files to the Machine Control Unit.

Parameter File Transfer

Procedure for transferring parameter files for machine configuration.

Machine Setup and Calibration

Foot Pedal Calibration

Calibrating the foot pedal sensor for accurate operator input.

Secondary Hydraulic Fill Procedures

Bleeding air from the hydraulic system after fluid replenishment.

Pressure Adjustments (Pitch and Steering)

Setting and verifying correct hydraulic pressures for pitch and steering systems.

Zero Stroke Position Adjustment

Adjusting the zero stroke position for the pitch cylinder assembly.

Trowel Speed Adjustments

Setting the left and right side trowel operational speeds.

Stroke Sensor Calibration

Calibrating the stroke sensor for accurate stroke feedback.

Blade Pitch and Leading Edge Adjustment

Adjusting blade pitch and leading edge height for optimal flatness.

Zero Pitch Cylinder Stops and Sensor Calibration

Setting pitch cylinder stops and calibrating pitch sensors accurately.

Inspection

Fluid Levels and Mechanical Checks

Checking fluid levels, grease points, and mechanical joint integrity.

Static Blade Pitch Drift Test

Performing a test to check blade pitch stability over a period.

Electrical and System Checks

Spray System and Electrical Checks

Verifying spray system, fan, lights, and switches.

Aesthetics and Decal Inspection

Assessing paint quality and ensuring decals are readable and intact.

Fuse Information

MQ Multiquip HTX6H Specifications

General IconGeneral
BrandMQ Multiquip
ModelHTX6H
CategoryTrowels
LanguageEnglish

Related product manuals