To Next PageTo Next Page
Need help?Do you have a question about the Mr. Coffee BVMC-BMG25 and is the answer not in the manual?
General| Model | BVMC-BMG25 |
|---|---|
| Category | Grinder |
| Type | Burr Grinder |
| Grind Settings | 18 |
| Power | 160 Watts |
| Voltage | 120V |
| Color | Black |
| Material | Plastic, Stainless Steel |
| Bean Hopper Capacity | 8 oz |
Explains the safety feature of a polarized plug for electrical shock reduction.
Guidelines for using detachable power supply cords or extension cords with the appliance.
Overview of the Mr. Coffee Cafe Grind Burr Grinder and its benefits.
Illustration identifying all the components of the Burr Grinder.
Describes the removable hopper that holds up to 1/2 lb of coffee beans.
Details the 18 settings for grinding coffee from fine to coarse.
Explains the automatic cup size settings for portioning coffee from 2-18 cups.
The unit automatically stops grinding when the selected portion is reached.
Allows for easy transfer of ground coffee from the grinder.
Highlights the stylish stainless-steel exterior of the grinder.
Features a built-in storage solution for excess power cord.
An integrated brush on the lid for easy cleaning of coffee grounds.
Steps for cleaning the grinder before its first use to ensure optimal performance.
Instructions on how to fill the bean hopper and replace the lid securely.
Guidance on using the Grind Size Selector for desired coffee coarseness.
How to set the Cup Size Selector for the desired amount of coffee grounds.
Instructions on pressing the On/Off button and the auto-stop function.
How to remove the grind chamber and use the grounds.
Using the brush to clean the chamber exit chute after grinding.
Explains how grind size affects coffee taste and potential overflows.
Recommendations for grinding coffee for espresso and cappuccino.
Advice for grinding coffee for percolators and French presses.
Guidance on bean quantities for specific brewing methods.
Emphasizes using only coffee beans and keeping parts in place.
Advice on avoiding motor overheating by limiting continuous cycles.
Recommends cleaning the grinder after every third use for optimal performance.
How to run the grinder empty on the coarsest setting to clear the path.
Steps for unplugging, removing hopper, chamber, and preparing for cleaning.
Instructions on removing and cleaning the upper burr component.
Guidance on reinstalling the top burr, bean hopper, and chamber lid.
Addresses issues where the grinder fails to operate, listing causes and solutions.
Solutions for when the grinder produces too little coffee grounds.
Explains causes and fixes for unevenly ground coffee particles.
Troubleshooting steps for when the grinder unexpectedly stops during operation.
How to resolve problems with the cup selection dial not turning.
Solutions for when the grind size selector cannot be turned.
Information on where to get the grinder serviced and who to contact.
How to locate authorized service centers via phone or website.
What details to provide when calling for service assistance.
Details the duration and coverage of the limited warranty.
Lists conditions and damages that are not covered by the warranty.
Explains the extent of Sunbeam's liability regarding damages.
Provides instructions for obtaining warranty service in the U.S.A.
