8 9
Unplug the machine. Place your stainless steel
frothing pitcher under the frothing wand.
Turn control knob back to “OFF.”
Slowly remove the portalter.
Remove the water reservoir cap.
Step 1: Unplug machine
Step 4: Turn control knob to off
Step 5: Slowly remove portalter
Step 2: Turn knob to steam
Step 3: Remove water reservoir cap
IMPORTANT! Always Release Pressure
Before Removing Water Reservoir Cap
Before First Use
WHAT YOU NEED ON HAND:
• A mug, water measuring pitcher (included) and a
stainless-steel frothing pitcher (included).
• Coffee should be ground to a ne espresso grind. We
recommend using a quality grinder or burr mill, such
as a Mr. Coffee® Burr Mill. If you’re using a burr mill,
select the nest grind setting. If you are purchasing pre-
ground coffee, use espresso ground coffee.
• Your choice of milk for making cappuccinos or lattes.
• Clean, fresh water that is ltered and free of impurities
– avoid soft water or well water. The type of water that
you brew with greatly affects the nal taste.
Turn control knob on the left side of the machine to
steam and let the steam or water exit the frothing
wand to release the pressure. When there is no
longer steam or water exiting the frothing wand,
move to step 3.
To Next Page
Loading...
