5. Lower the handle completely and
firmly to close the Lid and puncture
the K-Cup
®
Pack.
6. Depress the water marking button
and the hot water tank will open
automatically.
7. Fill the Hot Water tank with filtered
or bottled water up to the desired
fill level without exceeding the
max fill line.
Note: Any spills outside the fill area
will flow to the drip tray.
8. Close the Hot Water Tank cover.
8 9
9. Place a coffee cup in the
dispense area on the drip tray.
Press the BREW NOW button.
NOTE: Drip Tray can be removed
to accommodate larger mugs.
10. When the water reaches
temperature, the HEATING light
will go off and the brewing light
will turn on.
NOTE: Pump will remain on for up
to 90 seconds to complete brewing
and drying the K-Cup
®
Pack.
11. Enjoy!
BVMC-KG2_11ESM1.indd 9-10 2/1/12 2:50 PM
To Next Page
Loading...
